WindMaster Stove with 4Flex

SOTO WindMaster Stove with 4Flex – All-around Canister Stove For Windy Weather. Durable & Efficient Design with Built-in Windscreen and Micro Regulator Valve System – Compatible With Both Large And Small Pots – Canister NOT included

Boil 2 cups of water in under 2-1/2 minutes in strong winds and gusty weather. This well-made stove is able to stand up to harsh conditions.

• FOR BEST PERFORMANCE – The WindMaster’s regulator is compatible with gas mixtures such as butane, isobutane, and propane. It is not compatible with 100% propane. The use of 100% propane is prohibited. Keep the base of the WindMaster clean. Never place the base of the stove on the ground or in a sandy area. Always keep the plastic cap on the gas canister when not in use, during transport, and/or when stowing the stove. This is important in order to keep the valve system clean.
• SHOCK RESISTANT AND ULTRA LIGHTWEIGHT – Stealth igniter installed burner post improves ignition and prevents breakage, making this stove compact and lightweight. Due to the simple, unique design, it weighs only 67 g / 2.3 oz.
• MAINTAINS A CONSISTENT OUTPUT – Boiling time the same under a wide range of temperatures. Boil 2 cups of water in under 2-1/2 minutes in strong winds and gusty weather.
• SPECIALLY DESIGNED – The pot placed close to the flame plus the concave design of the burner head creates the effect of a built-in windscreen increasing the efficiency of fuel consumption.
• LARGE POT SUPPORTED – The kit includes the 4Flex that supports large size pots. It also can be used with the TriFlex (sold separately) support for smaller cookware

• 2024 Gear of the Year, Best in Test, The Great Outdoors Magazine
• Highest rated stove on the PCT. The Pacific Crest Trail Gear Guide: Class of 2019 Survey ranks SOTO’s WindMaster stove at the top of their list based on 846 completed surveys. Read more about it at Halfway Anywhere..
• “Soto has come up with a true winner of a stove in the Soto WindMaster, a cooking powerhouse ideal for adventure travelers needing a compact, efficient and easy-to-operate stove for backpacking, remote travel, and backcountry or other outdoor use.” (Therese Iknoian, HI Travel Tales).
• SNEWS recently put the WindMaster stove to the test. Here’s what their tester at Great Outdoor Provisions has to say about “the stealthy one.”:
• Fresh Off the Grid, an online destination for all things camp cooking out of Bend, Oregon, took a “deep dive into lightweight backpacking stoves” and came up with the WindMaster as the “best all around canister stove” winner, followed a bit down by SOTO’s Amicus stove..

The Soto WindMaster stove is designed so the pot sits close to the flame, making it more efficient in windy weather. Results in increased efficiency so boil time is quicker and longer. The concave design of the burner head creates the effect of a built-in windscreen. The 4Flex pot support works for a larger pot, but the smaller,TriFlex pot support, is available separately. An efficient stove for whatever size pot your adventure requires.

*NOTE: The WindMaster OD-1RXN which comes with only the 4Flex pot support replaces the previous WindMaster OD-1RXC that came with both the TriFlex and the 4Flex. The stove itself remains exactly the same.

The WindMaster uses the Micro Regulator valve system.

NEVER use with 100% Propane. Extremely dangerous.

WindMaster Stove Specifications:
Output: 2800 kcal/h 3260w 11000 BTU
Duration: Burns approx.1.5 hours with 8 oz.(250g) canister
Weight: 2.3 oz.(67g) with the optional TriFlex pot support
3.0. oz.(87g) with the 4Flex pot support
2.12 oz. (60g) with no pot support
Dimensions: Optional TriFlex only (Stowed)/3.7 x 0.4 x 1.0 inch (94 x 10 x 33 mm)
4Flex only (Stowed)1.9 x 3.0 x 1.7 inch (47 x 77 x 44 mm)

*NOTES:

If using TriFlex, reduce size of pot to approx. 800 ml.
Maximum pot size: 2 liter
The maximum volume liquid should be 1.5 liters and under 3 lbs.
A 110g canister may not properly support a large pot. The maximum pot size should be reduced to approx. 1 liter.
If salty food spills onto the stove, clean off completely to avoid damaging the die-cast aluminum surface.